Usage

Specially designed cold - formed thin gauge cross sections for mounting of a wide range of cladding materials. KONTI C,Z and Ó cross sections are used as:

• Metallic construction building purlins / sleepers
• Secondary metallic construction building elements (wind resistant joints etc.)

Benefits

The following benefits are achieved using KONTi C, Z and Ó cross sections:

• most cost - efficient weight to durability ratio
• zero down time
• minimal time to deliver
• reduction of:
• construction weight
• transportation cost
• labour cost
• construction time
• elimination of maintenance costs
• full technical support provided

In addition:
Purlins will be delivered to the exact dimensions. Mounting holes may also be pre-drilled at our production facility, at the points that the engineer's drawings denote.

 

Material specifications

C, Z and Ó cross sections consist of, regarding their production method, thin gauge cold - formed cross sections.
Their design and engineering is carried out according to Eurocode 3 provisions, Appendix 1.3 (General Rules - Supplementary Rules for cold formed thin gauge members and sheeting).
The quality of steel used is Fe E 320 G with a 320 N/mm2 rupture limit (fyb) and a 390 NTmm2 breakage limit (fu) (EN 10417 continuous hot - dip zinc coated carbon steel sheet of structural quality).
Regarding the materials' corrosion resistant properties, Z 275 EN 10147 and A1/95 galvanized steel is used.
Cross sections are produced in 1.5mm, 2mm, 2.5mm thickness, tolerances as per EN 10143.

C	S	A	B
140 180 210	70 90 90	40 50 65	30 35 35

Z	S	A	B
140 180 210	70 90 90	40 50 65	30 35 35